| Home | MS2™ | Latest News | Company |  |
MATERIAL SAFETY DATA SHEET
MS2™ 100 PB
Molten Solder Surfactant
US and Foreign Patents Pending
1. Product and Company Identification
Commercial Description – MS2 Molten Solder Surfactant for use with standard Sn60 and Sn63 tin-free solder processes.
Not recommended for use with lead-free solder processes
This product contains lead
This product conforms to ANSI Z400. 1-1993 and ISO 11014
Manufactured by: P. Kay Metal, Inc.
Telephone 323-585-5058
2448 E 25 th Street
Los Angeles , CA 90058
Emergency Phone: 1-800-535-5053 (Infotrac)
2. Composition / Information on Ingredients
Description CAS Number Content
Carboxy Alkanes 67254-79-9 >95%
Lead 7439-92-1 >1%
Tin 7440-31-5 <1%
Other Non-Hazardous <2%
Hazards Identification Not Considered as Hazardous
NFPA (National Fire Protection Association)
Health 1 – Insignificant
Flammability 1 – Slight
Reactivity 0 – Insignificant
Special Hazards None
3. Hazards Identification
Human Health Hazards
Inhalation Not Applicable at ambient temperature
Skin Unlikely to be irritant
Eye Contact Can cause irritation
Ingestion Unlikely to be harmful unless excessive amount swallowed
Physical/Chemical Hazards None identified
Environmental Hazards: None identified
4. First Aid Measures
Inhalation Remove to fresh air
Skin Contact Wash off with water and soap
Eye Contact Wash off with water. Get medical attention if any sensation persists
Ingestion Remove material from mouth. Drink plenty of water. If large amount swallowed or symptoms develop get medical attention
5. Fire Fighting Measures
Extinguishing Media Dry chemical, water spray, foam, carbon dioxide
Unsuitable Extingusihing Media none
Specific Hazards Thermal decomposition will evolve irritant vapors
Protection of Fire Fighters Self-contained breathing apparatus, full protective clothing
6. Accidental Release Measures
Personal Precautions: Avoid contact with eyes. Do not breathe vapor
Environmental Precautions Minimize contamination of drains, surface, and ground water
Methods for Cleaning Up Transfer product to suitably labeled containers for disposal at an approved site
Absorb liquid spillage on inert material (e.g. sand). Residues and small spillage may be washed away with water and detergent.
Other information: Spillages or uncontrolled discharge into watercourses must be alerted to the appropriate regulatory body
7. Handling and Storage
Handling No specific protective measures are required
Storage Store in the original closed containers
Other information For quality reasons: avoid elevated temperatures
Shelf 2 years from date of manufacture
MATERIAL SAFETY DATA SHEET
MS2™ 200 LF
Molten Solder Surfactant
(Lead-Free – RoHS Compliant)
US and Foreign Patents Pending
1. Product and Company Identification
Commercial Description – MS2 Molten Solder Surfactant for use with lead-free (RoHS-compliant) solder processes
This product conforms to ANSI Z400. 1-1993 and ISO 11014
Manufactured by: P. Kay Metal, Inc. Telephone 323-585-5058
2448 E 25 th Street
Los Angeles , CA 90058
Emergency Phone: 1-800-535-5053 (Infotrac)
2. Composition / Information on Ingredients
Description CAS Number Content
Carboxy Alkanes 67254-79-9 >96%
Tin 7440-31-5 <2%
Other Non-Hazardous <2%
Hazards Identification Not Considered as Hazardous
NFPA (National Fire Protection Association)
Health 1 – Insignificant
Flammability 1 – Slight
Reactivity 0 – Insignificant
Special Hazards None
3. Hazards Identification
Human Health Hazards
Inhalation Not Applicable at ambient temperature
Skin Unlikely to be irritant
Eye Contact Can cause irritation
Ingestion Unlikely to be harmful unless excessive amount swallowed
Physical/Chemical Hazards None identified
Environmental Hazard: None identified
4. First Aid Measures
Inhalation Remove to fresh air
Skin Contact Wash off with water and soap
Eye Contact Wash off with water. Get medical attention if any sensation persists
Ingestion Remove material from mouth. Drink plenty of water. If large amount swallowed or symptoms develop get medical attention
5. Fire Fighting Measures
Extinguishing Media: Dry chemical, water spray, foam, carbon dioxide
Unsuitable Extinguishing: Media none
Specific Hazards Thermal decomposition will evolve irritant vapors
Protection of Fire Fighters Self-contained breathing apparatus, full protective clothing
6. Accidental Release Measures
Personal Precautions: Avoid contact with eyes. Do not breathe vapor
Environmental Precautions Minimize contamination of drains, surface, and ground water
Methods for Cleaning-Up Transfer product to suitably labeled containers for disposal at an approved site
Absorb liquid spillage on inert material (e.g. sand). Residues and small spillage be washed away with water and detergent.
Other information Spillages or uncontrolled discharge into watercourses must be alerted to the appropriate regulatory body
7. Handling and Storage
Handling No specific protective measures are required
Storage Store in the original closed containers
Other information For quality reasons: avoid elevated temperatures
Shelf 2 years from date of manufacture
MATERIAL SAFETY DATA SHEET
MS2 200LS
Molten Solder Surfactant
(Lead-Free – RoHS Compliant)
US and Foreign Patents Pending
1. Product and Company Identification
Commercial Description – MS2 Molten Solder Surfactant for use with lead free Low Silver (RoHS Compliant) solder processes. This product conforms to ANSI Z400. 1-1993 and ISO 11014
Manufactured by: P. Kay Metal, Inc. Telephone 323-585-5058
2448 E 25 th Street
Los Angeles , CA 90058
Emergency Phone: 1-800-535-5053 (Infotrac)
2. Composition / Information on Ingredients
Description CAS Number Content
Carboxy Alkanes 67254-790-9 >96%
Tin 7440-31-5 <2%
Other Non-Hazardous <2%
Hazards Identification Not Considered as Hazardous
NFPA (National Fire Protection Association)
Health 0 – Insignificant
Flammability 1 – Slight
Reactivity 0 – Insignificant
Special Hazards None
3. Hazards Identification
Human Health Hazards
Inhalation Not Applicable at ambient temperature
Skin Unlikely to be irritant
Eye Contact Can cause irritation
Ingestion Unlikely to be harmful unless excessive amount swallowed
Physical/Chemical Hazards None identified
Environmental Hazards None identified
4. First Aid Measures
Inhalation Remove to fresh air
Skin Contact Wash off with water and soap
Eye Contact Wash off with water. Get medical attention if any sensation persists
Ingestion Remove material from mouth. Drink plenty of water. If large amount swallowed or symptoms develop get medical attention
5. Fire Fighting Measures
Extinguishing Media Dry chemical, water spray, foam, carbon dioxide
Unsuitable Extingusihing Media none
Specific Hazards Thermal decomposition will evolve irritant vapors
Protection of Fire Fighters Self-contained breathing apparatus, full protective clothing
6. Accidental Release Measures
Personal Precautions Avoid contact with eyes. Do not breathe vapor
Environmental Precautions Minimize contamination of drains, surface, and ground water
Methods for Cleaning Up Transfer product to suitably labeled containers for disposal at an approved site. Absorb liquid spillage on inert material (e.g. sand). Residues and small spillage may be washed away with water and detergent.
Other information Spillages or uncontrolled discharge into watercourses must be alerted to the appropriate regulatory body
7. Handling and Storage
Handling No specific protective measures are required
Storage Store in the original closed containers
Other information For quality reasons: avoid elevated temperatures
Shelf 2 years from date of manufacture
8. Exposure Control / Personal Protection
Engineering Measures Ensure ventilation or local exhaust if formation of vapor occurs
Hygiene Measures Good industrial hygiene should be followed
Occupational Exposure No occupational exposure limits have been established